We are closed for the Christmas & New Years Break from Monday 21st December 2020 to Sunday 3rd January 2021. We will Re-Open at 6:30am on Monday 4th January 2021. All Online Orders Places after 12pm Friday December 18 will not be dispatched until Tuesday 5th January 2021. Email & Phone will also be unattended during this time. Please Note due to the increase in volume of online orders prior to the christmas break, there is a slight delay in dispatching orders.
3 Pole 20A RCBO 10KA 30MA C Curve TYPE A (Busbar Type with Neutral Pigtail) - LSTO20C/003A
20 AMP, 30mAH, 10kA Trip Rating
This RCBO has been Tested to Fit NHP MOD6, NHP Concept One,NHP Concept Plus, Schneider Acti 9 and Only Some IPD Boards
*See Attachments Tab for Specs Sheet
Perfectly suited to the eureka range of distribution boards and the eureka ELS6 chassis, the eureka LSTO RCBO range is the first chassis mounted RCBO unit to enter the market. At 53mm wide, it only takes up 3 poles when mounted to a din chassis, unlike other units that require 4 poles, thus losing the uniformity of phase balancing.The range can also be retro fitted into other chassis and distribution enclosure brands available on the market, or as a stand alone unit.LSIS range of MCB’s complete the range as well as the Susol MCCB which will operate upstream of the RCBO and MCB range.A comprehensive software package aids with discrimination and selectivity, to make sure all circuit breakers in a power distribution system, operate independently without nuisance tripping from downstream faults.
> Provides protection against earth fault / leakage current, overload and short circuit
> Breaking capacity - Icn 10kA, Ics 7.5kA
> Rated voltage - 1 pole 240VAC, 3 pole 415VAC
> Rated residual current - 30mAH
> Tripping characteristic - A type
> Magnetic tripping characteristics - C curve
> Cable termination - 25mm
> Operating temperature - -5°C – +55°C
> Standards - AS/NZ IEC/EN610009-1
> Tested and certified in Australia to Australian standards