10A Double GPO Power Point with In-built RCD - PS4048
Double GPO with built-in RCD will deactivate the outlets when connected equipment fault occurs.
Ideal for protecting local equipment in workshops or garages.
• 30mA rated trip current
• Meets AU/NZ safety standards
Designed to be a direct replacement for your standard GPO fittings, combining two standard 240AC 10A mains (GPO) outlets with a built-in RCD to provide protection against electrical shock. In the event of a fault with the connected appliance or accident, such as cutting through the mains lead, the unit will provide complete isolation from mains. A test button, status indicator, and reset button allows you to check the RCD, which we recommend should be done each time before use.
Meets Australian and New Zealand safety standards.
Please Note: This item should be installed by a licenced electrician.
- Electric shock protection
- LED status indicator
- Reset and test buttons
- Line power indicator
CD Classified: Type II
Rated Tripping Current: 30mA
Operating Speed: <40mS Max.
Endurance: 2000 Cycles Minute
Contact Break: Double Pole
Standards: RCD Module-AS NZS 3190, Socket-AS NZS 3112
Minimum Back Box Depth: 35mm
Fixing Screws: M3.0 x 25mm
Cable Capacity: 4x2.5mm2,2x4mm2,1X6mm2